Hand Soldering

Single Output Desolder System with Venturi Workstand
Single Output Desolder System with Venturi Workstand

MFR-1150


The MFR-1100 Single Output Series is highly versatile in that it can be used with either a soldering tip, cartridge, tweezers or desoldering hand-piece. The MFR-1150 comes with one desoldering hand-piece and a venturi workstand.

 

Features and Benefits:

  • Venturi workstand
  • Provides shop air option for all MFR series
  • Compatible for use with all MFR systems
  • Uses existing DxP desolder cartridges and replaceable coil assembly (MFR-HDCA)
  • Small Bench Top foot print
  • SmartHeat® Technology provides exceptional power for high thermal demand applications

 

Product Comprises of:

 MFR-PS1100 :  MFR Single Output Power Supply 
 MFR-H5-DS :  Desoldering Hand-piece for the MFR Series
 MFR-WSDSX :  Desoldering Workstand with venturi compatible with MFR-H5- DS Hand-piece
 MFR-FTKIT :  Fittings and air hose kit
 AC-TC :  Desoldering Tip Cleaner

NOTE: No tip/cartridge included

 

Tips / Cartridges Series compatible with this system



  • Technical Specification

 

Power Supply:

Input Line Voltage: 100 - 240 VAC
Input Line Frequency: 50/60 HZ
Power Consumption: 65 Watts maximum
Output Power: 60 Watts maximum
Output Frequency: 450 KHz
Dimensions (approx.) W x D x H: 90mm (3.5") x 200mm (8") x 152.5mm (6")
Weight: 2.3kg (5.05 lbs)
Idle Tip Temperature Stability: +/- 1.1°C (2°F) in still air
Ambient Operating Temperature: 10 - 40°C (50°F - 104°F)
Maximum Enclosure Temperature: 55°C (131°F)
Tip to ground Potential: <2 Ohms
Surface resistivity: 105 – 109 Ohm
Approvals cTUVus CE
Hand-piece Cable Length:
 L=122cm (48"), burn resistant, ESD safe

 

MFR-H5-DS Desolder Hand-piece:

Power Cord (3-wire): 183 cm 18/3 SJT
Solder Hand-piece cable length: 152 cm (60"), burn proof, ESD safe
Hand piece connector: 8 pin power connector

MFR-WSDSX Workstand:

Input Voltage: 24V
Input Power: 15W
Workstand dimensions: 100mm x 200mm x 140mm (4" x 8" x 5.5")
Noise Level: < 55 dB
Recommended Air Pressure: 550kPa (80 PSI) - Shop air only
Vacuum suction force: 0.85 bar (25" Hg)

Accessories

Upgrade

Consumables

Spare Parts

Filters

  Metcal is a brand of

  

   © 2015 Metcal. All rights reserved 

   Privacy PolicyCode of Business ConductTerms & ConditionsSite Map    


 

Visit our other brand sites

Quant 3D
techcon