Hand Soldering

Solar Soldering System - Tip Hand-piece
Solar Soldering System - Tip Hand-piece

PS-900-SOLAR


The need to reduce PV manufacturing costs combined with the present shortage of polysilicon feedstock are driving a steady reduction in wafer and cell thicknesses. The PS-900-Solar Soldering System is the perfect solution

Soldering of wires (tabs and stringers) without causing damage, or cracks, to the cells is one step that becomes more challenging.

Features and Benefits:

  • Ability to solder at low, controlled temperatures
  • Reduces the stresses on the cells and the likelihood of micro-cracking               
  • Produces a controlled, high quality solder joint.  
  • Offers low cost of ownership, ease of use              
  • Calibration-free heater that reacts instantly to changing thermal loads, thus minimizing thermally induced stresses on the surface of the solar cells.       
  • The PS-900-Solar comes  with a specially designed hoof tip that optimizes the power delivered thus providing high  performance efficiency.

Product Comprises of:

PS-PW900 : Power Supply
PS-900-PC9 : Hand-piece with long cord (274cm / 9ft)
PS-CA3 : Coil Assembly
STV-DRH440A : Soldering tip
WS2-NS : Workstand
AC-CP2 : tip removal pad

 

Tips / Cartridges Series compatible with this system:



  • Technical Specification

 

Power Supply:

Output Frequency: 450 KHz
Output Power: 60 Watts max. at 22°C ambient temperature
Power Consumption: 90 Watts max.
Input Line Frequency: 50/60 Hz
Input Line Voltage: 100 - 240 VAC
Maximum Enclosure Temperature: 65°C
Ambient Operating Temperature: 10 - 40°C
Power Cord (3-wire): 274 cm 18/3 SJT
Dimensions W x D x H: 80 x 160 x 115 mm (3.1" x 6.3" x 4.5")

 

Soldering Handle and Coil Assembly:

Tip to grip: 58 mm (2.28")
Grip diameter: 13 mm (0.51")
 Overall length (with tip): 230 mm (9.06") with standard tips Connector  3-pin power connector
Handle Cord Assembly Length: 122 cm – burn proof, ESD safe
Idle Temperature Repeatability: ± 1.1°C in still air
Tip-to-Ground Resistance: < 2 ohms
Tip-to-Ground Potential: < 2 mV
Tip shaft diameter: 8.0 mm (0.31")
Tip length: 82 mm (3.23") to 93 mm (3.66") (typical)
Workstand W x D x H: 105 x 175 x 90 mm (4.1" x 6.9" x 3.5")

 

Accessories

Upgrade

Consumables

Spare Parts

Filters

  Metcal is a brand of

  

   © 2015 Metcal. All rights reserved 

   Privacy PolicyCode of Business ConductTerms & ConditionsSite Map    


 

Visit our other brand sites

Quant 3D
techcon