Hand Soldering

Production Soldering System
Production Soldering System - Tip Hand-piece


The PS-900 packs power and provides exceptional thermal control into a small benchtop footprint.

Features and Benefits:

  • SmartHeat® temperature control
  • Ergonomic, lightweight handle
  • Rugged cast aluminum housing
  • Added plating thickness to tips
  • Low cost, quick-change heater coil

Product Comprises of:

 PS-PW900   Power Supply 
 PS-HC3  Hand-piece with long cord with Coil Assembly
 SFV-CH15A :  Chisel soldering tip 1.5mm (.06")
 WS2-NS  Workstand
 AC-CP2 :  Tip removal pad

Tips / Cartridges Series compatible with this system:


  • Technical Specification


Power Supply:

Output Frequency: 450 KHz
Output Power: 60 Watts max. at 22°C ambient temperature
Power Consumption: 90 Watts max.
Input Line Frequency: 50/60 Hz
Input Line Voltage: 100 - 240 VAC
Maximum Enclosure Temperature: 65°C
Ambient Operating Temperature: 10 - 40°C
Power Cord (3-wire): 274 cm 18/3 SJT
Dimensions W x D x H: 80 x 160 x 115 mm (3.1" x 6.3" x 4.5")


Soldering Handle and Coil Assembly:

Tip to grip: 58 mm (2.28")
Grip diameter: 13 mm (0.51")
 Overall length (with tip): 230 mm (9.06") with standard tips Connector  3-pin power connector
Handle Cord Assembly Length: 122 cm – burn proof, ESD safe
Idle Temperature Repeatability: ± 1.1°C in still air
Tip-to-Ground Resistance: < 2 ohms
Tip-to-Ground Potential: < 2 mV
Tip shaft diameter: 8.0 mm (0.31")
Tip length: 82 mm (3.23") to 93 mm (3.66") (typical)
Workstand W x D x H: 105 x 175 x 90 mm (4.1" x 6.9" x 3.5")





Spare Parts


  Metcal is a brand of


   © 2018 Metcal. All rights reserved 

   Privacy PolicyCode of Business Conduct | UK Modern Slavery Act | Supplier Code of Conduct Terms & ConditionsSite Map    


Visit our other brand sites