Pressure Pot

OK International's TS1258 Pressure Pot (High Pressure, 100 psi) is designed to accommodate all solvent and epoxy fluids, as well as CA's and UV's. It will also accommodate black fittings and tubing in 1/4", 3/8", and 4 mm, with stainless steel compression fittings for a continuous fluid path from the reservoir inside the pot to the point of use. Air-tight seals ensure there are no leak points or air entrapment problems and that fluid touches nothing but tubing from reservoir to pump.

Disposable polyethylene dip tube and supply lines can be quickly changed. Includes 1/4" fluid line kit.

	Smart Features for Maximum Benefit Feature Benefit » 100 psi Operating pressure. » To handle fluid with viscosity up to 50,000 Cps » Fluid Outlet Port on the lid » For easy access » Two Handles » For easy removal of lid. » Three Knobs to open/close lid » Provide positive and uniform seal. » Pressure Gauge » Located on top for easy reading. » Pressure Regulator » Located on top for ease of access » Relief Valve with Pull Ring » To depressurize after usage. » Black Disposable polyethylene » Fluid can be changed quickly for the next dip tube and supply lines application. » Hose Clip » Holds air hose line steady. » Tubing sizes available: 1/4" OD standard; 3/8"OD and 4 mm OD optional.