Metcal Cartridges
SSC Soldering Cartridges For Metcal SP200 Soldering Systems
STTC Power TipsTM for the MX-500 and MX-5000 Series
 |
STTC-101P
Conical Sharp 1mm (.04")
|
 |
STTC-125P
Chisel 30° 1mm (.04")
|
 |
STTC-136P
Chisel 30° 2.5mm (.10")
|
 |
STTC-137P
Chisel 30° 1.8mm (.07")
|
 |
STTC-138P
Chisel 30° 1.5mm (.06")
|
 |
STTC-145P
Conical 0.4mm (.016")
|
 |
STTC-147P
Bevel 60°1.78mm (.07")
|
 |
STTC-1173P
Knife 5.0mm (.22")
|
|
1 = 700 Series for most standard applications. 0 = 600 Series and 5 = 500 Series also available for temperature sensitive applications.
8 = 800 Series for ceramic and high thermal demand applications.
|
STTC Tip Cartridges for MX-500 and MX-5000 Series
 |
STTC-X36*
Chisel 30° .10˜(2.5mm)
|
 |
STTC-X37*
Chisel 30° .07˜(1.78mm)
|
| For a wide variety of tasks. If you are choosing the first tip for your Metcal system, the STTC-037 is ideal.
|
 |
STTC-X38*
Chisel 30° .06˜ (1.5mm)
|
| A finer version of the STTC-037. Ideal for medium to light through-hole and general surface mount touch-up.
|
 |
STTC-X25
Chisel 30° .04˜ (1.0mm)
|
| Good for a variety of light soldering tasks. Looking for a surface mount touch-up tip? The STTC-025 should be your first choice.
|
 |
STTC-X07
Conical Sharp .04˜ (1.0mm)
|
| General-purpose SMT and through-hole tip when access is limited.
|
 |
STTC-X22
Conical Sharp .016˜ (0.4mm)
|
| Sharp tip cartridges for soldering SMT components or fine wire applications (not for general through-hole tasks).
|
 |
STTC-X06
Conical Sharp .016˜ (0.4mm)
|
| For limited access SMT rework.
|
 |
STTC-X40
Sharp Bent 30° .016˜ (0.4mm)
|
| Tip for soldering SMT components. The bend makes it much
easier to work on small circuits and PLCCs.
|
 |
STTC-X45
Bevel 60° .016˜ (0.4mm)
|
| An extended length fine tip for surface mount or fine wire applications (not for general through-hole tasks).
|
500 series x=5, 600 series x=0, 700 series x=1, 800 series x=8, when followed by an *
| Other Standard Cartridges |
 |
STTC-X17*
Extra Large Chisel
.20˜(5.0mm)
|
 |
STTC-X65
Large Chisel
.20˜ (5.0mm)
|
 |
STTC-X20
Long Reach
Chisel 12°
.15˜ (3.8mm)
|
 |
STTC-X13
Chisel 90°
.12˜ (3.0mm)
|
 |
STTC-X42
Long Reach Chisel 60°
.07˜(1.78mm) |
 |
STTC-X98
Chisel Bent 30°
.07˜ (1.78mm) |
 |
STTC-X99
Chisel Bent 30°
.06˜ (1.5mm) |
 |
STTC-X41
Chisel 30°
.05˜ (1.3mm)
|
 |
STTC-X01
Conical Sharp
.04˜ (1.0mm) |
 |
STTC-X31
Conical Sharp
.04˜ (1.0mm) |
 |
STTC-X43
Conical Sharp
.02˜ (0.5mm) |
 |
STTC-X11
Conical
.02˜ (0.5mm) |
 |
STTC-X16
Conical
.02˜ (0.5mm) |
 |
STTC-X44
Sharp Bent 30°
.02˜ (0.5mm) |
 |
STTC-X26
Sharp Bent 30°
.016˜ (0.4mm) |
 |
STTC-X14
Bevel 45°
.08˜ (2.03mm) |
 |
STTC-X35
Bevel 30°
.07˜ (1.78mm) |
 |
STTC-X47
Bevel 60°
.07˜ (1.78mm) |
 |
STTC-X05
Bevel 30°
.07˜ (1.78mm) |
500 series x=5 (for temperature sensitive applications), 600 series x=0 (for temperature sensitive applications), 700 series x=1 (for most standard applications), 800 series x=8 (for ceramic and high thermal demand applications), when followed by an *
SMTC Rework Cartridges for MX-500 and MX-5000 Series
Slot Tip Cartridges
|
DIMENSIONS IN INCHES (mm)
|
 |
| SMT
TYPE |
A |
B
|
D |
Part No. |
| Chip 0805 |
.090 (2.29) |
.050 (1.27) |
.070 (1.79 |
SMTC-X01 |
| Chip 1206, 1210 |
.140 (3.56) |
.060 (1.52) |
.070 (1.79) |
SMTC-X02 |
| Chip 1808, 1812 |
.190 (4.83) |
.080 (2.03) |
.075 (1.91) |
SMTC-X03 |
| Chip, Box B
(EIA SOPM-3528) |
.150 (3.81) |
.095 (2.41) |
.100 (2.54) |
SMTC-X32 |
| Melf, Box B (EIA SOPM-4532) |
.190 (4.83) |
.110 (2.79) |
.160 (4.06) |
SMTC-X36 |
| SOT-23 |
.068 (1.73) |
.100 (2.54) |
.050 (1.27) |
SMTC-X05 |
| Chip 0402, 0603,
0805 (angled) |
.080 (2.03) |
.050 (1.27) |
.060 (1.52) |
SMTC-X88 |
| Chip 0402, 0603 |
.070 (1.78) |
.040 (1.02) |
.040 (1.02) |
SMTC-X96 |
500 series x=5 600 series x=0 700 series x=1
*=NOT available for 500 series
Tunnel Tip Cartridges For Dual In-Line Packages
|
DIMENSIONS IN INCHES (mm) |
 |
| SMT TYPE |
A2 |
A |
B |
D |
Part No. |
| DPAC |
.335 (8.51) |
.335 (8.51) |
.250 (6.35) |
.200 (5.08) |
SMTC-X47 |
| SOIC-8 |
.200 (5.08) |
.200 (5.08) |
.170 (4.32) |
.090 (2.29) |
SMTC-X04 |
| SOIC-14,-16 |
.200
(5.08) |
.200 (5.08) |
.400 (10.16) |
.090 (2.29) |
SMTC-X06 |
| SOIC-14 |
.204 (5.18) |
.204 (5.18) |
.350 (8.89) |
.100 (2.54) |
SMTC-X142 |
| SOIC-20 |
.375 (9.53) |
.375 (9.53) |
.520 (13.21) |
.125 (3.18) |
SMTC-X10 |
| SOIC-24 |
.375 (9.53) |
.375 (9.53) |
.620 (15.75) |
.125 (3.18) |
SMTC-X09 |
| SOIC-28, SOL-34 |
.375 (9.53) |
.375 (9.53) |
.720 (18.29) |
.125 (3.18) |
SMTC-X07 |
| SOJ-28, SOM-36 |
.315 (8.00) |
.340 (8.64) |
.740 (18.80) |
.074 (1.88) |
SMTC-X26 |
600 series x=0 700 series x=1 *=NOT available for 600 series
**=NOT available for 700 series
Quad Tip Cartridges For PLCC
|
DIMENSIONS IN INCHES (mm) |
 |
| SMT TYPE |
A2 |
A |
B2 |
B |
D |
Part No.
|
| PLCC 20 |
.360 (9.14) |
.400 (10.16) |
.360 (9.14) |
.400 (10.16) |
.150 (3.81) |
SMTC-X12 |
| PLCC 32 |
.450 (11.43) |
.500 (12.70) |
.550 (13.97) |
.600 (15.24) |
.150 (3.81) |
SMTC-X16 |
| PLCC 28 |
.455 (11.56) |
.500 (12.70) |
.455 (11.58) |
.500 (12.70) |
.150 (3.81) |
SMTC-X13 |
| PLCC 44 |
.660 (16.76) |
.700 (17.78) |
.660 (16.76) |
.700 (17.78) |
.150 (3.81) |
SMTC-X14 |
| PLCC 68 |
.960 (24.38) |
.995 (25.27) |
.960 (24.38) |
.995 (25.27) |
.220 (5.59) |
SMTC-X18* |
| PLCC 52 |
.760 (19.30) |
.800 (20.32) |
.760 (19.30) |
.800 (20.32) |
.150 (3.81) |
SMTC-X17* |
600 series x=0 700 series x=1 for all quads use 700 SERIES tip cartridges
*=NOT available for 600 series
Please note: Dual tip cartridges require two power supply units and two hand-pieces. A Dual Hand-Piece Support (MX-DHS) is also recommended.
Quad Tip Cartridges For QFP
|
DIMENSIONS IN INCHES (mm)
|
|
| SMT TYPE |
A2 |
A |
B |
B2 |
D |
Part No.
|
| SQFP 48 (EIAJ) |
.330 (8.38) |
.330 (8.38) |
.330 (8.38) |
.330 (8.38) |
.100 (2.54) |
SMTC-X121 |
| SQFP 64 (EIAJ) |
.440 (11.18) |
.440 (11.18) |
.440 (11.18) |
.440 (11.18) |
.100 (2.54) |
SMTC-X120 |
| TQFP 44 |
.440 (11.18) |
.480 (12.19) |
.480 (12.19) |
.520 (13.21) |
.110 (2.79) |
SMTC-X159 |
| TQFP 80 |
.485 (12.32) |
.525 (13.34) |
.485 (12.32) |
.525 (13.34) |
.110 (2.79) |
SMTC-X132 |
| VQFP 100 (EIAJ) |
.570 (14.48) |
.610 (15.49) |
.570 (14.48) |
.610 (15.49) |
.110 (2.79) |
SMTC-X118 |
| QFP 100 (rectangular) |
.650 (16.51) |
.650 (16.51) |
.885 (22.48) |
.885 (22.48) |
.130 (3.30) |
SMTC-X43 |
| QFP 100 (square) |
1.040 (26.42) |
1.040 (26.42) |
1.040 (26.42) |
1.040 (26.42) |
.130 (3.30) |
SMTC-X44* |
Blade Tip Cartridges
|
SMTC-X64
Blade
0.20"(5mm)
Short
|
SMTC-X62
Blade
0.870" (22.10mm)
Long
|
SMTC-X61
Blade
0.620" (15.75mm)
Long
|
SMTC-X60
Blade
0.410" (10.41mm)
Long
|
500 series x=5 600 series x=0 700 series x=1 800 series x=8
**=NOT available for 500 or 800 series
 |
SMTC-X147*
Hoof |
 |
SMTC-X167**
Mini-Hoof |
 |
SMTC-X169*
Long Reach Hoof |
 |
SMTC-X170*
Long Reach Hoof |
 |
SMTC-X161*
Knife
(Tinned Area, .08" 2.03mm) |
 |
SMTC-X173
Knife
(Increased Tinned Area,
.23" 5.84mm) |
500 series x=5 600 series x=0 700 series x=1 800 series x=8
*=NOT available for 800 series **=NOT available for 500 or
800 series
Other special tip cartridges
|
 |
SMTC-X100
Micro XMT
Small Package
Co-Axial Tip
|
 |
SMTC-X136
Hot Plate
.425" sq. (10.8mm sq.)
|
500 series x=5 (for temperature sensitive applications), 600 series x=0 (for temperature sensitive applications), 700 series x=1 (for most standard applications)
SMTC Microfine Rework Tips for MX-500 and MX-5000 Series
 |
SMTC-X171
Use to remove 0201 and 0402 components from a "topside"
angle. This design increases microscope viewing when reworking/removing
micro chip capacitors/components. |
 |
SMTC-X172
Designed for fine drag soldering and point-to-point soldering.
This tip increases access between components and allows
for lead to lead or solder bridge clean-up. |
 |
SMTC-X174
Long reach micro hoof tip designed with a smaller surface
area than the mini-hoof for optimal drag soldering of
components in tight spots. |
 |
SMTC-X175
Micro-hoof tip designed with a smaller surface area than
the mini- hoof for drag soldering of small/micro leaded
components. |
 |
STTC-X90
Microfine tip designed for soldering and touch-up of micro
components such as 0201s and 0402s. |
500 series x=5 (for temperature sensitive applications), 600 series x=0 (for temperature sensitive applications), 700 series x=1 (for most standard applications), 800 series x=8 (for ceramic and high thermal demand applications).
PTTC Tweezer Talon Cartridges for MX-5000 Series
 |
PTTC-x01B*
Tweezers cartridge,
bent conical, 0.4mm 0.016" (pair) |
 |
PTTC-x01
Tweezers cartridge,
conical, 0.4mm 0.016" (pair) |
 |
PTTC-x02
Tweezers cartridge,
blade 1.3mm 0.05" (pair) |
 |
PTTC-x03
Tweezers cartridge,
blade 2.0mm 0.08" (pair) |
 |
PTTC-x08B
Tweezers cartridge,
3.2mm 0.12" (pair) |
 |
PTTC-x04
Tweezers cartridge,
blade 6.35mm 0.25" (pair) |
 |
PTTC-x05
Tweezers cartridge,
blade 16mm 0.63" (pair) |
 |
PTTC-x06
Tweezers cartridge,
blade 20.5mm 0.81" (pair) |
 |
PTTC-x07
Tweezers cartridge,
blade 28mm 1.10" (pair) |
600 series x=6 (for temperature sensitive applications), 700 series x=7 (for most standard applications)
TATC Tweezer Talon Cartridges for MX-500 Series
| Part Number |
Description |
| TATC-601 |
Fine Point Tip .015" (0.4mm) |
| TATC-602 |
Blades Tip .25" (6.35mm) |
| TATC-603 |
Blades Tip .62" (15.75mm) |
| TATC-604 |
Blades Tip .81" (20.57mm) |
| TATC-605 |
TSOP 32 Tip |
| TATC-606 |
Blades Tip 1.1" (27.94mm) |
| TATC-608 |
Angled Viper Tip .05" (1.27mm) |
600 series (for temperature sensitive applications)
STDC Desoldering Cartridges for MX-500 and MX-5000 Series
Dimension in inches
| Diameter A (inside) |
Diameter B (outside) |
700 Series |
800 Series |
Long Reach* |
Long Reach (800 Series) |
| 0.025 |
0.055 |
STDC-102 |
STDC-802 |
N/A |
N/A |
| 0.030 |
0.066 |
STDC-103 |
STDC-803 |
STDC-703L |
STDC-803L |
| 0.040 |
0.070 |
STDC-104 |
STDC-804 |
STDC-704L |
STDC-804L |
| 0.050 |
0.080 |
STDC-105 |
STDC-805 |
STDC-705L |
STDC-805L |
| 0.060 |
0.090 |
STDC-106 |
STDC-806 |
N/A |
N/A |
| 0.095 |
0.125 |
STDC-107 |
STDC-807 |
N/A |
N/A |
Dimension in milimiters
| Diameter A (inside) |
Diameter B (outside) |
700 Series |
800 Series |
Long Reach* |
Long Reach (800 Series) |
|
| 0,6 |
1,4 |
STDC-102 |
STDC-802 |
N/A |
N/A |
| 0,7 |
1,7 |
STDC-103 |
STDC-803 |
STDC-703L |
STDC-803L |
| 1,0 |
1,8 |
STDC-104 |
STDC-804 |
STDC-704L |
STDC-804L |
| 1,3 |
2,0 |
STDC-105 |
STDC-805 |
STDC-705L |
STDC-805L |
| 1,5 |
2,3 |
STDC-106 |
STDC-806 |
N/A |
N/A |
| 2,4 |
3,2 |
STDC-107 |
STDC-807 |
N/A |
N/A |
600 Series for temperature sensitive applications, 700 Series for most standard applications, 800 Series for ceramic and high thermal demand applications
UFTC Ultra-Fine Soldering Cartridges for MX-5000 System
 |
UFTC-7CN01
UltraFine Tip Cartridge, Conical 0.13mm x 5.1mm (0.005" x 0.2") |
 |
UFTC-7CN02
UltraFine Tip Cartridge, Conical 0.2mm x 5mm (0.01" x 0.2") |
 |
UFTC-7CN04
UltraFine Tip Cartridge, Conical 0.4mm x 5mm (0.02" x 0.2") |
 |
UFTC-7CNL04
UltraFine Tip Cartridge, Conical, Long 0.4mm x 9mm (0.02" x 0.31") |
 |
UFTC-7CNB02
UltraFine Tip Cartridge, Conical, Bent 0.2mm x 5.5mm (0.01" x 0.22") |
 |
UFTC-7CNB04
UltraFine Tip Cartridge, Conical, Bent 0.4mm x 5.5mm (0.02" x 0.22") |
 |
UFTC-7CH06
UltraFine Tip Cartridge, Chisel 0.6mm x 5.1mm (0.024" x 0.2") |
 |
UFTC-7CH08
UltraFine Tip Cartridge, Chisel 0.8mm x 5.1mm (0.03" x 0.2") |
 |
UFTC-7CH12
UltraFine Tip Cartridge, Chisel 1.2mm x 5mm (0.05" x 0.2") |
 |
UFTC-7CHL06
UltraFine Tip Cartridge, Chisel, Long 0.6mm x 9mm (0.024" x 0.35") |
 |
UFTC-7CHL08
UltraFine Tip Cartridge, Chisel, Long 0.8mm x 9mm (0.03" x 0.35") |
 |
UFTC-7DRH408
UltraFine Tip Cartridge, Hoof, Micro 0.8mm x 5.1mm (0.03" x 0.2") |
 |
UFTC-7DRH412
UltraFine Tip Cartridge, Hoof, Micro 1.2mm x 5.1mm (0.048" x 0.2") |
7 = 700 Series for most standard applications. UFTC Tip Cartridges are only available in 700 Series
|
SSC Soldering Cartridges
STTC PowerTips Cartridges
STTC Soldering Cartridges
SMTC Rework Cartridges
PTTC Tweezer Cartridges
TATC Talon Cartridges
STDC Desoldering Cartridges
UFTC UltraFine Soldering Cartridges
|
