Hand-piece Upgrade Kits

Add versatility to your MFR System. Hand-piece Upgrade Kits can be ordered to compliment any of the MFR Systems. Kits include both the hand-piece and workstand.

HAND-PIECE UPGRADE KITS
Part No.	Description
MFR-SRC-AD	Solder / Rework Cartridge Upgrade Kit, hand-piece and workstand
MFR-PTZ-AD	Precision Tweezer Upgrade Kit, hand-piece and workstand
MFR-PST-AD	Production / Solder Tip Upgrade Kit, hand-piece and workstand

Note: tips and cartridges are not included and need to be ordered separately.

Contents subject to change without notice"

Technical Specifications

MFR-PTZ, MFR-SRC, MFR-PST, MFR-STZ

Ambient Operating Temperature:10- 40°C
Maximum Enclosure Temperature:55°C
Input Line Voltage:100- 240 VAC, grounded circuit
Input Line Frequency:50/60 Hz
Power Consumption:65 Watts max.
Output Power:
50 Watts max. at 22°C ambient temperature
Output Frequency:450 KHz
Power Cord 3-Wire:183cm (18/3") SJT
Power Supply Dimensions w x d x h:
122mm x 200mm x 152.5mm (4.8" x 8" x 6")
Agency Tested Per:IEC 61000-6-1,EC 61000-6-3 and UL499, FCC CFR Part 15
Tip-to-Ground Potential:< 2mV
Tip-to-Ground Resistance:< 2 ohms
Idle Temperature Stability:± 1.1°C in still air
Hand-piece Cable Length:
L=71cm (48"), burn proof, ESD safe
Connector:8-pin power connector
Workstand Dimensions w x d x h:
100 mm x 200 mm x 100 mm (4" x 8" x 4")