MFR-1140

Use the precision tweezers to rework SMD components with fine dimension to large blade geometries..

Key Features & Benefits

SmartHeat® Technology provides exceptional power for high thermal demand applications
Offers a comprehensive range of tweezer cartridges
Hand-pieces are ergonomic for operator safety and comfort

MFR-1140 Single output, one precision tweezers hand-piece, workstand
Part No.	Description
MFR-1140	Single output, one precision tweezers hand-piece, workstand
Includes
MFR-H4-TW	Hand-piece, Tweezers Cartridge
MFR-PS1100	Power Supply, Single Output
MFR-WSPT	Workstand for Tweezers Hand-piece (MFR-H4-TW), Black Cradle (standard)

Contents subject to change without notice
System does not include any tips or cartridges

Precision Tweezer Cartridges

	TFP-BLP1 Tweezer Cartridge, Blade 1.0mm (0.04") Pair
	TFP-BLP2 Tweezer Cartridge, Blade 2.0mm (0.08") Pair
	TFP-CNP1 Tweezer Cartridge, Conical 0.4mm (.015") Pair

Standard Tweezer Cartridges

BLADE TIPS
	TFP-BLH40 Heavy Duty Tweezer Pair A=6.35mm (.25")
	TFP-BLH50 Heavy Duty Tweezer Pair A=16mm (.62")
	TFP-BLH60 Heavy Duty Tweezer Pair A=20.5mm (.81")
	TFP-BLH70 Heavy Duty Tweezer Pair A=28mm (1.1")

To order specialty versions of the Precision Tweezer Cartridges replace the "F" in the part number with the appropriate letter designate for your application when ordering:
T = Temperature Sensitive C = Ceramic or Heavy Load

Dimensions and artwork listed are for indication/guidance only. Numbers have been rounded up. Please contact your local technical support if you require specific technical information.

Technical Specifications

MFR-1110, MFR-1120, MFR-1140, MFR-1160, MFR-1161

Input Line Voltage / Frequency:
100- 240 VAC, 50/60 Hz grounded circuit
Power Consumption:65 Watts maximum
Power Output Maximum:
60 Watts max. at 22°C
Output Frequency:450 KHz
Idle Temperature Stability:± 1.1°C (2°F)
Ambient Operating Temperature:
10- 40°C (50°F - 104°F)
Maximum Enclosure Temperature:55°C (131°F)
Power Cord 3-Wire:183cm (18/3") SJT
Hand-piece Cable Length:
L=122cm (48"), burn resistant, ESD safe
Hand-piece Connector:8-pin cicular DIN
Tip-to-Ground Potential:< 2mV
Tip-to-Ground Resistance:< 2 ohms
Certification / Marking:cTUVus, CE
Power Supply Dimensions w x d x h:
90mm x 142mm x 197mm (3.5" x 5.6" x 7.8")
Workstand Dimensions w x d x h:
100 mm x 200 mm x 100 mm (4" x 8" x 4")
Surface Resistivity:10⁵-10⁹ Ohms

Weight:
MFR-PS1100: 2.3 kg (5.05 lbs)
Hand-piece: 0.12 kg (0.26 lbs)
Workstand: 0.69 kg (1.51 lbs)
MFR-PS100 w/ hand-piece and workstand:
3.1 kg (6.84 lbs)

With hand soldering, the task is to make a quality solder connection, without damaging the substrate and without negatively impacting throughput. All of the standard MFR Series power tips & rework cartridges are designed for use with glass fiber (FR4) PCB substrates. This is denoted by the second letter in the part number: "F". For example: SFP-CH10, DFP-CN3, and SFV-CNL10.

However, some specialist applications require working with thermally demanding or temperature sensitive substrates, such as ceramic hybrids or flexible circuits. OK International has developed specialty heaters that quickly deliver the necessary power, but operate at temperatures that minimize the risk of substrate damage. These are denoted by replacing the "F" in the part number with a "T" for temperature sensitive or a "C" for demanding loads. Please contact your local representative for information and availability of specialty tip heaters. For example: STP-CH10 and DCP-CN3.

F = Standard FR4 Substrate

T = Temperature Sensitive

C = Ceramic or Heavy Load

MFR-1140 in Action

Precision Tweezer in Action