MFR-1160

This system will allow users of the Metcal SP200 Soldering System to continue to use their Metcal SSC cartridges.

Key Features & Benefits

SmartHeat® Technology provides exceptional power for high thermal demand applications
High power output at a fixed temperature provides high throughput with excellent yields
MFR-H6-SSC hand-piece has a comprehensive range of Metcal SSC cartridges for maximum flexibility
Hand-pieces are ergonomic for operator safety and comfort

MFR-1160 Single output, one cartridge soldering hand-piece, workstand
Part No.	Description
MFR-1160	Single output, one cartridge soldering hand-piece, workstand
System Components
MFR-H6-SSC	Hand-piece, Metcal SSC Soldering Cartridge
MFR-PS1100	Power Supply, Single Output
WS2	Auto Sleep Workstand

Contents subject to change without notice

Metcal SSC Solder Tip Cartridges

METCAL SSC SOLDER TIP CARTRIDGES
500 Series X=5, 600 Series X=6, 700 Series X=7
	SSC-X17A Extra Large Chisel .21˜ (5.3mm)
	SSC-X13A Chisel 90° .13˜ (3.3mm)
	SSC-X36A Chisel 30° .10˜ (2.5mm
	SSC-X42A Long Reach Chisel 60° .07˜ (1.78mm)
	SSC-X70A Long Chisel .07˜ (1.78mm)
	SSC-X37A Chisel 30° .07˜ (1.78mm)
	SSC-X38A Chisel 30° .06˜ (1.5mm)
	SSC-X25A Chisel 30° .04˜ (1.0mm)
	SSC-X74A Conical Sharp .055˜ (1.4mm)
	SSC-X01A Conical Sharp .04˜ (1.0mm)
	SSC-X22A Conical Sharp .02˜ (0.51mm)
	SSC-X72A Conical Chisel .07˜ (1.78mm)
	SSC-X71A Conical Chisel .04˜ (1.0mm)
	SSC-X54A Sharp Bent 30° .02˜ (0.51mm)
	SSC-X26A Sharp Bent 30° .02˜ (0.51mm)
	SSC-X47A Bevel 60° .07˜ (1.78mm)
	SSC-X45A Bevel 60° .016˜ (0.4mm)
	SSC-X67A Drag Soldering Tip (Mini-Hoof)
	SSC-X61A Drag Soldering Tip (Knife)
	SSC-X39A Drag Soldering Tip (Hoof)
	SSC-X73A Drag Soldering Tip (Increased Tinned Area, .24˜ 6.1mm)

Technical Specifications

MFR-1110, MFR-1120, MFR-1140, MFR-1160, MFR-1161

Input Line Voltage / Frequency:
100- 240 VAC, 50/60 Hz grounded circuit
Power Consumption:65 Watts maximum
Power Output Maximum:
60 Watts max. at 22°C
Output Frequency:450 KHz
Idle Temperature Stability:± 1.1°C (2°F)
Ambient Operating Temperature:
10- 40°C (50°F - 104°F)
Maximum Enclosure Temperature:55°C (131°F)
Power Cord 3-Wire:183cm (18/3") SJT
Hand-piece Cable Length:
L=122cm (48"), burn resistant, ESD safe
Hand-piece Connector:8-pin cicular DIN
Tip-to-Ground Potential:< 2mV
Tip-to-Ground Resistance:< 2 ohms
Certification / Marking:cTUVus, CE
Power Supply Dimensions w x d x h:
90mm x 142mm x 197mm (3.5" x 5.6" x 7.8")
Workstand Dimensions w x d x h:
100 mm x 200 mm x 100 mm (4" x 8" x 4")
Surface Resistivity:10⁵-10⁹ Ohms

Weight:
MFR-PS1100: 2.3 kg (5.05 lbs)
Hand-piece: 0.12 kg (0.26 lbs)
Workstand: 0.69 kg (1.51 lbs)
MFR-PS100 w/ hand-piece and workstand:
3.1 kg (6.84 lbs)

With hand soldering, the task is to make a quality solder connection, without damaging the substrate and without negatively impacting throughput. All of the standard MFR Series power tips & rework cartridges are designed for use with glass fiber (FR4) PCB substrates. This is denoted by the second letter in the part number: "F". For example: SFP-CH10, DFP-CN3, and SFV-CNL10.

However, some specialist applications require working with thermally demanding or temperature sensitive substrates, such as ceramic hybrids or flexible circuits. OK International has developed specialty heaters that quickly deliver the necessary power, but operate at temperatures that minimize the risk of substrate damage. These are denoted by replacing the "F" in the part number with a "T" for temperature sensitive or a "C" for demanding loads. Please contact your local representative for information and availability of specialty tip heaters. For example: STP-CH10 and DCP-CN3.

F = Standard FR4 Substrate

T = Temperature Sensitive

C = Ceramic or Heavy Load