Products & Applications
   >>   Home >  Products & Applications >  Soldering/Desoldering >  MFR-2200 Series >  MFR-2241


MFR-2241

Meet all the requirements of soldering rework with the MFR-2241 which includes a soldering cartridge hand-piece and a precision tweezers hand-piece

Key Features & Benefits

  • SmartHeat® Technology provides exceptional power for high thermal demand applications
  • Dual simultaneous outputs allow for single or dual operator use
  • Allows one operator to use two hand-pieces together
  • Offers a comprehensive range of cartridges
  • Hand-pieces are ergonomic for operator safety and comfort
MFR-2241
Part No. Description
MFR-2241 Dual output, one soldering cartidge hand-piece and one precision tweezers hand-piece, workstand
Includes  
MFR-HR-TW Hand-piece, Tweezers Cartridge
MFR-PS2200 Power Supply, Dual Simultaneous Output
MFR-WSPT Workstand for Tweezers Hand-piece (MFR-H4-TW), Black Cradle (standard)

Contents subject to change without notice"


Precision Tweezer Cartridges

TFP-BLP1
Tweezer Cartridge, Blade 1.0mm (0.04") Pair
TFP-BLP2
Tweezer Cartridge, Blade 2.0mm (0.08") Pair
TFP-CNP1
Tweezer Cartridge, Conical 0.4mm (.015") Pair

Standard Tweezer Cartridges

BLADE TIPS




TFP-BLH40
Heavy Duty Tweezer Pair
A=6.35mm (.25")
TFP-BLH50
Heavy Duty Tweezer Pair
A=16mm (.62")
TFP-BLH60
Heavy Duty Tweezer Pair
A=20.5mm (.81")
TFP-BLH70
Heavy Duty Tweezer Pair
A=28mm (1.1")

To order specialty versions of the Precision Tweezer Cartridges replace the "F" in the part number with the appropriate letter designate for your application when ordering:
T = Temperature Sensitive C = Ceramic or Heavy Load

Dimensions and artwork listed are for indication/guidance only. Numbers have been rounded up. Please contact your local technical support if you require specific technical information.

Technical Specifications

MFR-2210, MFR-2220, MFR-2240, MFR-2222, MFR-2241

Input Line Voltage / Frequency:
100- 240 VAC, 50/60 Hzgrounded circuit
Power Consumption:130 Watts maximum
Output Power Maximum:
60 Watts max. at 22°C per output (two outputs)
Idle Temperature Stability:± 1.1°C (2°F)
Ambient Operating Temperature:
10- 40°C (50°F - 104°F)
Maximum Enclosure Temperature:55°C (131°F)
Power Cord 3-Wire:183cm (18/3") SJT
(S = 600 Volt Service Cord, J = JuniorService - 300 Volt, T = Thermoplastic)
 Hand-piece Cable Length:
L=122cm (48"), burn resistant, ESD safe
Hand-piece Connector:8-pin cicular DIN
Tip-to-Ground Potential:< 2mV
Tip-to-Ground Resistance:< 2 ohms
Certification / Marking:cTUVus, CE
Power Supply Dimensions w x d x h:
170mm x 200mm x 152.5mm (7" x 8" x 6")
Workstand Dimensions w x d x h:
100 mm x 200 mm x 100 mm (4" x 8" x 4")
Surface Resistivity:105-109 Ohms

Weight:
MFR-PS2200: 2.97 kg (6.55 lbs)
Hand-piece: 0.115 kg (0.254 lbs)
Workstand: 0.686 kg (1.51 lbs)
MFR-PS2200 w/ 2 hand-pieces and 2 workstands: 4.57 kg (10.08 lbs)


With hand soldering, the task is to make a quality solder connection, without damaging the substrate and without negatively impacting throughput. All of the standard MFR Series power tips & rework cartridges are designed for use with glass fiber (FR4) PCB substrates. This is denoted by the second letter in the part number: "F". For example: SFP-CH10, DFP-CN3, and SFV-CNL10.

However, some specialist applications require working with thermally demanding or temperature sensitive substrates, such as ceramic hybrids or flexible circuits. OK International has developed specialty heaters that quickly deliver the necessary power, but operate at temperatures that minimize the risk of substrate damage. These are denoted by replacing the "F" in the part number with a "T" for temperature sensitive or a "C" for demanding loads. Please contact your local representative for information and availability of specialty tip heaters. For example: STP-CH10 and DCP-CN3.

F = Standard FR4 Substrate
T = Temperature Sensitive
C = Ceramic or Heavy Load



Precision Tweezer


Precision Tweezer in Action