Upgrade Kits

UPGRADE KITS
Part No.	Description
MFR-UK1	Solder Cartridge Hand-piece (MFR-H1-SC) and Workstand (WS1)
MFR-UK2	Solder Tip Hand-piece (MFR-H2-ST) and Workstand (WS1)
MFR-UK4	Tweezers Hand-piece (MFR-H4-TW) and Workstand (MFR-WSPT)

Note: tips and cartridges are not included and need to be ordered separately.

Spare Parts

SPARE PARTS
Part No.	Description
MFR-CA2	Coil Assembly, Soldering Tip Hand-piece (MFR-H2-ST)
AC-CP2	Cartridge / Tip Removal Pad
AC-BP	Brass Pad (pack of 10)

Contents subject to change without notice"

Technical Specifications

MFR-2210, MFR-2220, MFR-2240, MFR-2222, MFR-2241

Input Line Voltage / Frequency:
100- 240 VAC, 50/60 Hzgrounded circuit
Power Consumption:130 Watts maximum
Output Power Maximum:
60 Watts max. at 22°C per output (two outputs)
Idle Temperature Stability:± 1.1°C (2°F)
Ambient Operating Temperature:
10- 40°C (50°F - 104°F)
Maximum Enclosure Temperature:55°C (131°F)
Power Cord 3-Wire:183cm (18/3") SJT
(S = 600 Volt Service Cord, J = JuniorService - 300 Volt, T = Thermoplastic)
Hand-piece Cable Length:
L=122cm (48"), burn resistant, ESD safe
Hand-piece Connector:8-pin cicular DIN
Tip-to-Ground Potential:< 2mV
Tip-to-Ground Resistance:< 2 ohms
Certification / Marking:cTUVus, CE
Power Supply Dimensions w x d x h:
170mm x 200mm x 152.5mm (7" x 8" x 6")
Workstand Dimensions w x d x h:
100 mm x 200 mm x 100 mm (4" x 8" x 4")
Surface Resistivity:10⁵-10⁹ Ohms

Weight:
MFR-PS2200: 2.97 kg (6.55 lbs)
Hand-piece: 0.115 kg (0.254 lbs)
Workstand: 0.686 kg (1.51 lbs)
MFR-PS2200 w/ 2 hand-pieces and 2 workstands: 4.57 kg (10.08 lbs)